Experimental study of the purification performance of a MopFan-based photocatalytic air cleaning system.

Severe acute respiratory syndrome coronavirus (SARS-CoV)-2, the virus that causes the coronavirus disease (COVID)-19, is primarily transmitted through respiratory droplets which linger in enclosed spaces, often exacerbated by HVAC systems. Although research to improve HVAC handling of SARS-CoV-2 is progressing, currently installed HVAC systems cause problems because they recirculate air and use ineffective filters against virus. This paper details the process of developing a novel method of eliminating air pollutants and suspended pathogens in enclosed spaces using Photocatalytic Oxidation (PCO) technology. It has been previously employed to remove organic contaminants and compounds from air streams using the irradiation of titanium dioxide (TiO2) surfaces with ultraviolet (UV) lights causing the disintegration of organic compounds by reactions with oxygen (O) and hydroxyl radicals (OH). The outcome was two functional prototypes that demonstrate the operation of PCO-based air purification principle. These prototypes comprise a novel TiO2 coated fibre mop system, which provide very large surface area for UV irradiation. Four commercially accessible materials were used for the construction of the mop: Tampico, Brass, Coco, and Natural synthetic. Two types of UV lights were used: 365 nm (UVA) and 270 nm (UVC). A series of tests were conducted that proved the prototype's functionality and its efficiency in lowering volatile organic compounds (VOCs) and formaldehyde (HCHO). The results shown that a MopFan with rotary mop constructed with Coco fibres and utilising UVC light achieves the best VOC and HCHO purification performance. Within 2 h, this combination lowered HCHO by 50% and VOCs by 23% approximately.

Estimating the restraint of SARS-CoV-2 spread using a conventional medical air-cleaning device: Based on an experiment in a typical dental clinical setting.

OBJECTIVES: Droplets or aerosols loaded with SARS-CoV-2 can be released during breathing, coughing, or sneezing from COVID-19-infected persons. To investigate whether the most commonly applied air-cleaning device in dental clinics, the oral spray suction machine (OSSM), can provide protection to healthcare providers working in clinics against exposure to bioaerosols during dental treatment. METHOD: In this study, we measured and characterized the temporal and spatial variations in bioaerosol concentration and deposition with and without the use of the OSSM using an experimental design in a dental clinic setting. Serratia marcescens (a bacterium) and ΦX174 phage (a virus) were used as tracers. The air sampling points were sampled using an Anderson six-stage sampler, and the surface-deposition sampling points were sampled using the natural sedimentation method. The Computational Fluid Dynamics method was adopted to simulate and visualize the effect of the OSSM on the concentration spatial distribution. RESULTS: During dental treatment, the peak exposure concentration increased by up to 2-3 orders of magnitude (PFU/m3) for healthcare workers. Meanwhile, OSSM could lower the mean bioaerosol exposure concentration from 58.84 PFU/m3 to 4.10 PFU/m3 for a healthcare worker, thereby inhibiting droplet and airborne transmission. In terms of deposition, OSSM significantly reduced the bioaerosol surface concentration from 28.1 PFU/m3 to 2.5 PFU/m3 for a surface, effectively preventing fomite transmission. CONCLUSION: The use of OSSM showed the potential to restraint the spread of bioaerosols in clinical settings. Our study demonstrates that OSSM use in dental clinics can reduce the exposure concentrations of bioaerosols for healthcare workers during dental treatment and is beneficial for minimizing the risk of infectious diseases such as COVID-19.

Experimental Investigation of a MopFan-Based Photocatalytic Air Purification Device

Photocatalytic oxidation (PCO) is a potential approach for air cleaning, especially when utilising titanium dioxide (TiO2). A MopFan is similar to a roller brush but is made of flexible fibres coated with TiO2. Unlike conventional filter/mesh UV systems, a MopFan provides a wide UV-TiO2 interaction surface area and airflow passage. This revolutionary technique can be low cost, efficient, and potentially effective against viruses, making it suitable for cleaning indoor air. It is easy to use but technically advanced. The system may be mounted on walls, floors, or placed on desktops. A photocatalytic air purification based on MopFan prototype was designed, constructed and tested. This study utilised copper wires (0.1 mm, 0.3 mm, 0.4 mm, and 0.5 mm), plastic fibres (0.5 mm and 1.1 mm), brass wire (0.4 mm), steel wire (0.38 mm), and organic “coco” fibres (0.4 mm). Copper wire (0.5 mm) and organic fibre (0.4 mm) were found to be effective against SARS-CoV-2, but brass (0.4 mm) and plastic (0.5 mm) fibres were found only partially effective. The purification performance was compared using MopFan with plastic (0.5 mm), brass (0.4 mm) and organic “coco” (0.4 mm) fibres but the other materials were rejected due to their poor qualities or difficulties in manufacturing. It was found that the system has a better effectiveness with organic fibres, around 21% of reduction consistently throughout the test. It was also found that by using the photocatalytic MopFan air cleaning system, the final concentration of pollutants in a room is determined by the rate and concentration of pollutant generation. Highlights 1. Organic fibres do not require sanding prior to being coated with TiO2 solution. 2. Copper and organic fibres are effective SARS-CoV-2 inhibitors. 3. Organic fibres are the most efficient for air purification. 4. The performance of purification is related to the concentration of pollutants. © 2022 The Author(s).